If the vehicle is usually used under the conditions corresponding to any severe condition code given below, it is recommended that applicable maintenance operation be performed at the particular interval shown in the chart below.
Severe condition code.
A – Repeated short trips.
B – Driving on rough and/or muddy roads.
C – Driving on dusty roads.
D – Driving in extremely cold weather and/or on salted roads.
E – Repeated short trips in extremely cold weather.
H – Towing a trailer.

NOTE:
I – Inspect, clean, adjust, lubricate or replace as necessary.
T – Tighten to the specified torque.
R – Replace or change.
L – Lubricate.
*1 Inspect more frequently if the vehicle is used under dusty conditions.
*2 Clean more frequently if the air flow from the air conditioner decreases.
Hazard Warning Switch
Hazard Warning Switch
Push in the hazard warning switch to activate
the hazard warning lights. All four turn
signal lights and both turn signal indicators
will flash simultaneously. To turn off ...
Driving on Slippery Roads
Driving on Slippery Roads
Under wet road conditions you should
drive at a lower speed than on dry roads
due to possible slippage of tires during
braking. When driving on icy, snow-covered,
or m ...
Information Display
Information Display
(1) Clock.
(2) Thermometer.
(3) Instantaneous fuel consumption/Average fuel consumption/Driving range.
(4) “H” button.
(5) “M” button.
(6) “DISP” button.
(7) F ...