Temperature Gauge

Temperature Gauge
Temperature Gauge

When the ignition switch is in the “ON” position, this gauge indicates the engine coolant temperature. Under normal driving conditions, the indicator should stay within the normal, acceptable temperature range between “H” and “C”. If the indicator approaches “H”, overheating is indicated.

Follow the instructions for engine overheating in the “EMERGENCY SERVICE” section.

See also:

Automatic Transmission Fluid
Specified Fluid Use an automatic transmission fluid SUZUKI ATF 3317 or Mobil ATF 3309. Fluid Level Check CAUTION: Driving with too much or too little fluid can damage the transmission. You must ...

Fuel Filler Cap
SX4 SX4 SEDAN The fuel filler cap is located on the left rear side of the vehicle. The fuel filler door can be unlocked by pulling up the opener lever located on the outboard side of the ...

Leak Detection Pump
NOTE: Your vehicle has a pump to regularly check the vehicle’s evaporative emission control system for leaks. This check is performed approximately five hours after the engine is turned off. Du ...

Copyright © www.suzuguide.com