Drive Belt

When the engine is running, keep WARNING:
When the engine is running, keep hands, hair, clothing, tools, etc. away from the moving fan and drive belts.

Make sure the drive belt tension is correct.

If the belt is too loose, insufficient battery charging, engine overheating, poor power steering, poor air conditioning or excessive belt wear can result. When you press the belt with your thumb midway between the pulleys, there should be a deflection according to the following chart.

The belts should also be examined to ensure that they are not damaged.

If you need to replace or adjust the belt have it done by your SUZUKI dealer.

Engine Oil and Filter


See also:

“ESP OFF” Switch
“ESP OFF” Switch ESP® is a registered trademark of DaimlerChrysler AG. The “ESP OFF” switch is located on the center of the instrument panel. You can turn the ESP® systems (other than ...

Exterior
From the center roof pillar forward, the SX4 Sport sedan is a dead ringer for the SX4 Crossover, featuring the same stylishly assertive face with creased bodywork. The SportBack ditches the Crosso ...

Clutch Pedal
Clutch Pedal Check the clutch pedal for smooth operation and clutch fluid level from time to time. If clutch dragging is felt with the pedal fully depressed, have the clutch inspected by your S ...

Copyright © www.suzuguide.com