Temperature Gauge

Temperature Gauge
Temperature Gauge

When the ignition switch is in the “ON” position, this gauge indicates the engine coolant temperature. Under normal driving conditions, the indicator should stay within the normal, acceptable temperature range between “H” and “C”. If the indicator goes outside this range and approaches “H”, overheating is indicated. Follow the instructions in the “If the Engine Overheats” of “Emergency Remedies” section.

CAUTION:
Continuing to drive the vehicle when engine overheating is indicated can result in severe engine damage.

See also:

Introduction
This owner’s manual applies to the GRAND VITARA series: NOTE: The illustrated model is one of the GRAND VITARA series. Thank you for choosing SUZUKI and welcome to our growing family. Your choic ...

Starting the Engine
Before Starting the Engine 1) Make sure the parking brake is set fully. 2) Manual Transmission – Shift into “N” (Neutral) and depress the clutch pedal all the way to the floor. Hold it whil ...

Engine Hood
Engine Hood To open the engine hood: 1) Pull the hood release handle located on the outboard side of the driver’s side of the instrument panel. This will disengage the engine hood lock halfwa ...

Copyright © www.suzuguide.com