Rear Window Wiper/Washer Switch
Rear Window Wiper/Washer Switch
To turn the rear wiper on, twist the rear wiper switch on the end of the lever forward to the “ON” position. If your vehicle is equipped the “INT” position, the rear wiper operates intermittently when you twist the switch forward to the “INT” position. To turn the rear wiper off, twist the switch rearward to the “OFF” position.
With the rear wiper in the “OFF” position, twist the switch rearward and hold it there to spray window washer fluid.
With the rear wiper in the “ON” position, turn the switch forward and hold it there to spray window washer fluid.
CAUTION:
Clear ice or snow from the rear window
and rear wiper blade before
using the rear wiper. Accumulated ice
or snow could prevent the wiper
blade from moving, causing damage
to the wiper motor.
See also:
Fog Light Switch (if equipped)
Fog Light Switch (if equipped)
The front fog light comes on when the fog
light switch is pushed in with the lighting
switch turned to the third position and the
beams set to the low beam positio ...
Leak Detection Pump
NOTE:
Your vehicle has a pump to regularly check
the vehicle’s evaporative emission control
system for leaks. This check is performed
approximately five hours after the engine is
turned off. Du ...
Important
WARNING/CAUTION/NOTE
Please read this manual and follow its
instructions carefully. To emphasize special
information, the symbol and
the
words WARNING, CAUTION and NOTE
have special meanings. ...