Head Restraints
Head restraints are designed to help reduce the risk of neck injuries in case of an accident. Adjust the head restraint to the position which places the center of the head restraint closest to the top of your ears. If this is not possible for very tall passengers, adjust the head restraint as high as possible.
WARNING:
• Never drive the vehicle with the
head restraints removed.
• Do not attempt to adjust the head restraint while driving.
Front
To raise the head restraint, pull upward on the restraint until it clicks. To lower the restraint, push down on the restraint while holding in the release knob (1). If a head restraint must be removed (for cleaning, replacement, etc.), use the following procedure.
1) Insert a sharp-pointed tool into the small hole (2). Push the tip into the hole (2) and hold it while pushing in the release knob (1).
2) Pull the head restraint all the way out while pushing the release knob (1) and holding the tip in the hole (2).
NOTE:
It may be necessary to recline the seatback
to provide enough overhead clearance
to remove the head restraint.
To reinstall the head restraint, insert the head restraint bars into the holes (2) and push the head restraint down.
Rear
To raise the rear head restraint, pull upward on the restraint until it clicks. To lower the restraint, push down on the restraint while holding in the release knob.
If a head restraint must be removed (for cleaning, replacement, etc.), push in the release knob and pull the head restraint all the way out.
When installing a child restraint system, raise the head restraint to the most upper position.
Kizashi in the Market
The Kizashi catches your attention with a low starting price and continues to
impress with its interior quality and features like dual-zone automatic climate
control, a USB stereo input and standa ...
Braking
Braking
The distance needed to bring any vehicle
to a halt increases with the speed of the
vehicle. The braking distance needed, for
example, at 60 km/h (37 mph) will be
approximately 4 times g ...
Ignition Switch
The ignition switch has the following four
positions:
LOCK
This is the normal parking position. It is the
only position in which the key can be
removed.
Manual transaxle
• Manual transaxl ...