Inside Rearview Mirror
Inside Rearview Mirror
You can adjust the inside rearview mirror by hand so as to see the rear of your vehicle in the mirror. To adjust the mirror, set the selector tab (1) to the day position, then move the mirror up, down or sideways by hand to obtain the best view.
When driving at night, you can move the selector tab to the night position to reduce glare from the headlights of vehicles behind you.
WARNING:
• Always adjust the mirror with the
selector set to the day position.
• Only use the night position if it is necessary to reduce glare from the headlights of vehicles behind you.
Be aware that in this position you may not be able to see some objects that could be seen in the day position.
Outside Rearview Mirrors
Adjust the outside rearview mirrors so you can just see the side of your vehicle in the mirrors.
The passenger’s side mirror is a convex (curved surface) mirror. Objects seen in this mirror will look smaller and appear farther away than when seen in a flat mirror.
WARNING:
Be careful when judging the size or
distance of a vehicle or other object
seen in the side convex mirror. Be
aware that objects look smaller and
appear farther away than when seen
in a flat mirror.
Power Mirror Control (if equipped)
The switch to control the power rearview mirrors is located on the driver’s door panel. You can adjust the mirrors when the ignition switch is in the “ACC” or “ON” position.
To adjust the mirrors:
1) Move the selector switch to the left or
right to select the mirror you wish to
adjust.
2) Press the outer part of the switch that corresponds to the direction in which you wish to move the mirror.
3) Return the selector switch to the center position to help prevent unintended adjustment.
Assist Grips (if equipped)
Assist Grips (if equipped)
Assist grips are provided for convenience.
CAUTION:
To avoid damaging the assist grip
and the molded headlining, do not
hang down the assist grip. ...
Troubleshooting
Applicable to every device
Radio
CD
Error display
This unit has a number of self-diagnostic functions to protect the system.
If a problem should occur, the display shows the type of error. ...
Instrument Light Brightness Control
Instrument Light Brightness Control
Your vehicle has a system to automatically
dim the instrument panel lights when the
ignition switch is in the “ON” position and
the lighting switch is tur ...