Windshield Washer Fluid


Check that there is washer fluid in the tank


Check that there is washer fluid in the tank by looking at the washer fluid level gauge which is attached to the cap of the washer fluid tank. If the fluid level is near “E” mark, refill it.

WARNING:
WARNING:
Do not use “anti-freeze” solution in the windshield washer reservoir. This can severely impair visibility when sprayed on the windshield, and also damage your vehicle’s paint.

CAUTION:
Damage may result if the washer motor is operated with no fluid in the washer tank.

Use a good quality windshield washer fluid, diluted with water as necessary.

See also:

Tire Changing Tool
SX4 SX4 SEDAN The jack, wheel brace, jack handle are stowed in the luggage compartment. To remove the spare tire, turn its bolt (1) counterclockwise and remove it. To remove the jack, tu ...

“ESP OFF” Switch (if equipped)
“ESP OFF” Switch (if equipped) ESP® is a registered trademark of DaimlerChrysler AG. The “ESP OFF” switch is located on the center console. You can turn the ESP® systems (other than A ...

Second generation Mitsubishi Outlander
Exploring the Second-Generation Mitsubishi Outlander: A Comprehensive Overview In the bustling world of small SUVs, the Mitsubishi Outlander often finds itself overshadowed by its more prominent ...

Copyright © www.suzuguide.com