Engine Hood
To open the engine hood: 1) Pull the hood release handle located on the outboard side of the driver’s side of the instrument panel. This will disengage the engine hood lock half-way.
2) Push the under-hood release lever sideways with your finger, as shown in the illustration. While pushing the lever, lift up the engine hood.
3) Continue to lift up the hood until it is high enough to support with the prop rod.
WARNING:
Make sure the hood is fully closed
and latched before driving. If it is not,
it can fly up unexpectedly during
driving, obstructing your view and
resulting in an accident.
See also:
Fuel Filler Cap
SX4
SX4 SEDAN
The fuel filler cap is located on the left rear
side of the vehicle. The fuel filler door can
be unlocked by pulling up the opener lever
located on the outboard side of the ...
Seat Belts and Child Restraint Systems
WARNING:
An air bag supplements, or adds to,
the frontal crash protection offered
by seat belts. The driver and all passengers
must be properly restrained
by wearing seat belts at all time ...
Windshield Wiper and Washer Lever
Windshield Wipers
To turn the windshield wipers on, move the
lever down to one of the three operating
positions. In the “INT” position (if
equipped), the wipers operate intermittently.
The ...