Interior Light Switch
The interior light switch has three positions, which functions as described below.
(1) The light comes on and stays on regardless of whether the door is open or closed.
(2) The light comes on when the door is opened.
After closing all doors, the light will remain on for about 15 seconds and then fade out. If you insert the key into the ignition switch during that time, the light will start to fade out immediately.
After removing the key from the ignition switch, the light will turn on for about 15 seconds and then fade out.
(3) The light remains off even when the door is opened.
NOTE:
The number of doors involved in the lighting
operation of the interior light depends
on the vehicle specification. If there is a
switch (rubber projection) at the door
opening as shown, the door is involved in
the lighting operation. The tailgate of SX4
is also involved in this operation even without
the rubber projection.
See also:
Engine Hood
Engine Hood
To open the engine hood:
1) Pull the hood release handle located on
the outboard side of the driver’s side of
the instrument panel. This will disengage
the engine hood lock halfwa ...
Heating System
Description of Controls
Temperature selector (1)
This is used to select the temperature by
turning the selector.
Blower speed selector (2)
This is used to turn on the blower and to
select blow ...
Windshield Washer Fluid
Check that there is washer fluid in the tank
by looking at the washer fluid level gauge
which is attached to the cap of the washer
fluid tank. If the fluid level is near “E” mark,
refill i ...