Hazard Warning Switch
Hazard Warning Switch
Push in the hazard warning switch to activate the hazard warning lights. All four turn signal lights and both turn signal indicators will flash simultaneously. To turn off the lights, push the switch again.
Use the hazard warning lights to warn other traffic during emergency parking or when your vehicle could otherwise become a traffic hazard.
See also:
Specifications
NOTE:
Specifications are subject to change without
notice.
M/T: Manual transaxle.
A/T: Automatic transaxle.
2WD: 2-wheel drive.
i-AWD: intelligent All Wheel Drive.
...
Using the 2WD/i-AWD (intelligent All Wheel Drive) Switch (if equipped)
Using the 2WD/i-AWD (intelligent All Wheel Drive) Switch (if equipped)
This i-AWD system enables you to select
the driving mode according to the driving
conditions by operating the 2WD/i-AWD
swi ...
Tire Changing Tool
SX4
SX4 SEDAN
The jack, wheel brace, jack handle are
stowed in the luggage compartment.
To remove the spare tire, turn its bolt (1)
counterclockwise and remove it.
To remove the jack, tu ...