Lighting / Turn Signal Control Lever

Suzuki SX4 / Suzuki SX4 Owners Manual / Steering Column Controls / Lighting / Turn Signal Control Lever

Lighting Operation
Lighting Operation

To turn the lights on or off, twist the knob on the end of the lever. There are three positions: in the “OFF” position all lights are off; in the middle position the front parking lights, taillights, license plate light, and instrument lights are on, but the headlights are off; in the third position the headlights come on in addition to the other lights.

With the headlights on, push the lever forward


With the headlights on, push the lever forward to switch to the high beams (main beams) or pull the lever toward you to switch to the low beams. When the high beams (main beams) are on, a light on the instrument panel will come on. To momentarily activate the high beams (main beams) as a passing signal, pull the lever slightly toward you and release it when you have completed the signal.

Daytime Running Light (D.R.L.) System

The headlights light, but are dimmer than the low beam, when the following three conditions are all met. Also, the D.R.L. indicator light on the instrument panel comes on.

Conditions for D.R.L. system operation: 1) The engine is running.

2) The parking brake is released.

3) The lighting switch is at either the “OFF” or the “Middle” position.

NOTE:
Be sure to turn the lighting switch to the third position at night or at any time of the day when driving or weather conditions require the headlights to operate at full brightness and the taillights to be on.

Lights “On” reminder (if equipped)

A buzzer/chime sounds to remind you to turn off the lights if they are left on when the ignition key is removed and the driver’s door is opened.

Turn Signal Operation

With the ignition switch in the “ON” position, move the lever up or down to activate the right or left turn signals.

Normal turn signal
Normal turn signal

Move the lever all the way upward or downward to signal. When the turn is completed, the signal will cancel and the lever will return to its normal position.

Lane change signal
Lane change signal

Some times, such as when changing lanes, the steering wheel is not turned far enough to cancel the turn signal. For convenience, you can flash the turn signal by moving the lever part way and holding it there. The lever will return to its normal position when you release it.

See also:

Exterior
From the center roof pillar forward, the SX4 Sport sedan is a dead ringer for the SX4 Crossover, featuring the same stylishly assertive face with creased bodywork. The SportBack ditches the Crosso ...

Folding Seats
Folding Rear Seats To fold the rear seats forward: 1) Remove the luggage compartment cover. 2) Stow the seat belt buckles of the center and left seating position into the pocket of the seat cu ...

2008 Suzuki Grand Vitara review By Steven Cole Smith
The market for small sport utility vehicles is among the toughest in the automotive world: So many good products, but only so many buyers. What's a little manufacturer like Suzuki to do? Offer g ...

Copyright © www.suzuguide.com