WARNING:
You should take extreme care when
working on your vehicle to prevent
accidental injury. Here are a few precautions
that you should be especially
careful to observe:
• To prevent damage or unintended
inflation of the air bag system, be
sure the battery is disconnected
and the ignition switch has been in
the “LOCK” position for at least 90
seconds before performing any
electrical service work on your
SUZUKI. Do not touch air bag system
components or wires. The
wires are wrapped with yellow tape
or yellow tubing, and the couplers
are yellow for easy identification.
• Do not leave the engine running in garages or other confined areas.
• When the engine is running, keep hands, clothing, tools and other objects away from the moving fan and fan belt.
• When it is necessary to do service work with the engine running, make sure that the parking brake is set fully and the transmission is in Neutral (for manual transmission vehicles) or Park (for automatic transmission vehicles).
• Do not touch ignition wires or other ignition system parts when starting the engine or when the engine is running, or you could receive an electric shock.
• Be careful not to touch a hot engine, exhaust manifold and pipes, muffler, radiator and water hoses.
• Do not allow smoking, sparks or flames around gasoline or the battery.
Flammable fumes are present.
• Do not get under your vehicle if it is supported only with the portable jack provided in your vehicle.
• Be careful not to cause accidental short circuits between the positive and negative battery terminals.
• Keep used oil, engine coolant and
other fluids away from children and
pets. Dispose of used fluids properly;
never pour them on the
ground, into sewers, etc.
NOTICE (for U.S.A.).
Maintenance, replacement or repair of the emission control devices and systems may be performed by any automobile repair establishment or individual using any part which has been certified under the provisions in the Clean Air Act sec. 207. (a) (2).
Manual Heating and Air Conditioning System
Description of Controls
Temperature selector (1)
This is used to select the temperature by
turning the selector.
Blower speed selector (2)
This is used to turn on the blower and to
select blow ...
Instrument Light Brightness Control
Instrument Light Brightness Control
Your vehicle has a system to automatically
dim the instrument panel lights when the
ignition switch is in the “ON” position and
the lighting switch is tur ...
Anti-Theft Feature
Anti-Theft Feature
(1) Power on/off knob
(2) Track up button/Fast forward button
(3) Preset buttons (1 to 6)
The anti-theft feature is intended to discourage
theft or the audio system by preven ...