Hazard Warning Switch

Hazard Warning Switch
Hazard Warning Switch

Push in the hazard warning switch to activate the hazard warning lights. All four turn signal lights and both turn signal indicators will flash simultaneously. To turn off the lights, push the switch again.

Use the hazard warning lights to warn other traffic during emergency parking or when your vehicle could otherwise become a traffic hazard.

See also:

Under the Hood
All SX4 models use the same engine and transmissions, though the Crossover has standard all-wheel drive and the others come with front-wheel drive. Mechanical features include: 150-horsepower, 2 ...

Windshield Washer Fluid
Check that there is washer fluid in the tank by looking at the washer fluid level gauge which is attached to the cap of the washer fluid tank. If the fluid level is near “E” mark, refill i ...

Starting the Engine
Before Starting the Engine 1) Make sure the parking brake is set fully. 2) Manual Transaxle – Shift into “N” (Neutral) and depress the clutch pedal all the way to the floor. Hold the clutch ...

Copyright © www.suzuguide.com