Listening to a XM Satellite Radio (Option)

Suzuki SX4 / Suzuki SX4 Owners Manual / Instrument Panel / Listening to a XM Satellite Radio (Option)

Listening to a XM Satellite Radio (Option)
Listening to a XM Satellite Radio (Option)

(1) XM button
(2) Category button (CAT) (3) Seek up button
(4) Seek down button
(5) Manual tuning knob
(6) Display button (DISP) (7) Preset button (1 to 6) (8) Scan button (SCAN)

Display
Display

(A) Band
(B) Channel number
(C) Category indicator

If you want to purchase XM Satellite Radio Service, contact your SUZUKI dealer.

It is necessary to buy a special tuner to receive XM broadcasting.

Your vehicle is capable of receiving XM Satellite Radio anywhere in the United States except Hawaii, Alaska, and Canada.

XM MODE

Selecting a band

Press the XM button (1).

Each time the button is pressed, the band changes in the following order.

Selecting a category


Selecting a category

Press the seek up button (3) or the seek down button (4). The category is changed.

Turning the category function on/off

Press and hold the category button (2) for 2 seconds or longer, and “CATEGORY ON” appears on the display, the CAT indicator (c) lights up and the CATEGORY function is activated.

Press and hold the category button (2) for 2 seconds or longer again, and “CATEGORY OFF” appears on the display and the CAT indicator turns off, indicating that the CATEGORY function has been turned off.

NOTE:
The first time you use the radio, turn the category function on.

Selecting a category

Press the seek up button (3) or seek down button (4) to select a category.

Displaying the category

Press the category button (2) to have the currently selected category appear on the display.

Selecting a channel

Turn the manual tuning knob (5) to select a channel.

NOTE:
When the category function is on, only those channels included in the selected category can be selected.

Selecting the item to be displayed

Press the display button (6).

Each time the button is pressed, the item on display changes in the following order.

Preset memory


Preset memory

1) Select the desired station.

2) Select the preset button (7) to which you want to store the station and press and hold the button for 2 seconds or longer.

Scan tuning

1) Press the scan button (8).

Stations are automatically searched for in a sequential order, starting from the station being currently received, and scan tuning stops for 5 seconds at the frequency where there is a station available.

2) Press the scan button (8) again to stop scanning at the frequency currently being received.

Satellite Radio Reception

Satellite radio receives signals from two satellites in orbit over the equator. Therefore, satellite radio reception can be interrupted when there are objects south of your vehicle. To help compensate for this, ground-based repeaters are placed in major metropolitan areas, but depending on the geographic situation (for example, if mountains or buildings are on the south side of your vehicle), you may experience reception problems.

See also:

Identification Numbers
Vehicle Identification Number Vehicle Identification Number The Vehicle Identification Number (VIN) may be found in the location shown in the above illustrations. This number is used to regis ...

Using the 2WD/i-AWD (intelligent All Wheel Drive) Switch (if equipped)
Using the 2WD/i-AWD (intelligent All Wheel Drive) Switch (if equipped) This i-AWD system enables you to select the driving mode according to the driving conditions by operating the 2WD/i-AWD swi ...

Folding Seats
Folding Rear Seats To fold the rear seats forward: 1) Remove the luggage compartment cover. 2) Stow the seat belt buckles of the center and left seating position into the pocket of the seat cu ...

Copyright © www.suzuguide.com